Adesivi Elettricamente Conduttivi (ISOTROPICO)
Roartis® offers both isotropically conductive adhesives (conducting in 3 dimensions), as well as anisotropically conductive adhesives (conducting only in the z-direction).
Within our family of electrically conductive adhesives, we provide materials optimized for dispensing, stencil- or screenprinting, as well as stamping and jetting processes. Typical applications include bonding micro-electronic components onto temperature sensitive substrates, such as flexible circuits, or replacing solder pastes in applications where increased flexibility is required, especially for severe thermal-cycling requirements.
Compare | Product | Product group | Strong points | One komponent or two komponents | Color | Viscosity | Cure | CTE | Tg | Shore Hardness | Thermal conductivity | Work life | Storage | Fineness (µm) | Density (gr/cc) | Thyxotropie | Datasheet |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
https://www.iq-bond.com/products/iq-bond-5481-ce/ compare |
IQ-BOND 5481-CE | Electrically conductive adhesive (Isotropic) | For high temperature applications | 1 K | Silver | 15.000 mPa.s | Multiple stage cure: 2 hrs @ 90°C + 3 hrs @ 150°C | 230°C | 24 hrs | 3 months @ -20°C; 6 months @ -40°C |
| ||||||
https://www.iq-bond.com/products/iq-bond-5601-ce/ compare |
IQ-BOND 5601-CE | Electrically conductive adhesive (Isotropic) | Low curing temperatures, easy mix ratio, good conductivity even cured at RT, long shelf life | 2 K (1:1 wght%) | Silver | Medium | Medium @ Low temperature | 12 months @ RT | Medium |
| |||||||
https://www.iq-bond.com/products/iq-bond-5600-ce-smp/ compare |
IQ-BOND 5600-CE-SMP | Electrically conductive adhesive (Isotropic) | Low curing temperatures, high viscous and thyxotropic, low outgassing (meets ESA and NASA outgassing standards), smaller and more uniform particle size version of IQ-BOND 5600-CE | 2 K (100:2,5 wght%) | Silver | High | Medium @ Low temperature | 6 months @ RT | High |
| |||||||
https://www.iq-bond.com/products/iq-bond-5600-ce/ compare |
IQ-BOND 5600-CE | Electrically conductive adhesive (Isotropic) | Low curing temperatures, high viscous and thyxotropic, low outgassing (meets ESA and NASA outgassing standards) | 2 K (mix-ratio 100:2,5) | Silver | High | Medium @ Low temperature | 6 months @ RT | High |
| |||||||
https://www.iq-bond.com/products/iq-bond-5409-ce/ compare |
IQ-BOND 5409-CE | Electrically conductive adhesive (Isotropic) | Modified version IQ-BOND 5402-CE for making it suitable for SMD-component attach with non-noble finisches such as Sn, SnPb, OSP-Cu, etc. | 1 K | Silver | Very High | Fast @ High temperature | 3 months @ -20°C; 6 months @ -40°C | TBD |
| |||||||
https://www.iq-bond.com/products/iq-bond-5408-ce/ compare |
IQ-BOND 5408-CE | Electrically conductive adhesive (Isotropic) | Modified version of IQ-BOND 5402-CE for making it suitable for SMD-component attach with non-noble finishes such as Sn, SnPb, OSP-Cu etc. | 1 K | Silver | Very High | Fast @ High temperature | 3 months @ -20°C; 6 months @ -40°C | High |
| |||||||
https://www.iq-bond.com/products/iq-bond-5404-hv-ce/ compare |
IQ-BOND 5404-HV-CE | Electrically conductive adhesive (Isotropic) | Dispensing and jetting through very fine needles, low temperature, higher viscosity version of IQ-BOND 5404-CE | 1 K | Silver | 140.000 mPa.s | 60 min @ 150°C / 120 min @ 120°C | 24 hrs | 3 months @ -20°C; 6 months @ -40°C | High |
| ||||||
https://www.iq-bond.com/products/iq-bond-5404-ce/ compare |
IQ-BOND 5404-CE | Electrically conductive adhesive (Isotropic) | Dispensing and jetting through very fine needles, low temperature | 1 K | Silver | 35.000 mPa.s | 60 min @ 150°C / 120 min @ 120°C | 48 hrs | 3 months @ -20°C; 6 months @ -40°C | Medium |
| ||||||
https://www.iq-bond.com/products/iq-bond-5402-ce/ compare |
IQ-BOND 5402-CE | Electrically conductive adhesive (Isotropic) | Short curing cycles, good electrical conductivity, high speed small dot dispensing, lower viscosity version of IQ-BOND 5402-CE | 1 K | Silver | 78.000 mPa.s | 5 min @ 150°C / 15 min @ 120°C | 24 hrs | 3 months @ -20°C; 6 months @ -40°C | Medium |
| ||||||
https://www.iq-bond.com/products/iq-bond-5401-ce/ compare |
IQ-BOND 5401-CE | Electrically conductive adhesive (Isotropic) | Short curing cycles, good electrical conductivity, high speed small dot dispensing | 1 K | Silver | Very High | Fast @ High temperature | 6 months @ -20°C; 12 months @ -40°C | High |
| |||||||
https://www.iq-bond.com/products/iq-bond-5132-ce/ compare |
IQ-BOND 5132-CE | Electrically conductive adhesive (Isotropic) | Flexible, dispensing/printing/stamping, electrically conductive version of IQ-BOND 2132 | 1 K | Silver | 15.000 mPa.s | 15 min @ 175°C / 90 min @ 120°C | 12 hrs | 6 months @ -20°C; 12 months @ -40°C | High |
|